Applications and Products

PESTAN MECHANICAL PIPE (SDR 9,11 or 17.6 with fiber)

PESTAN MECHANICAL PIPENominal ID Sizes: ½”– 12” 

Identification and sizes available in different wall thicknesses for following Nominal ID Sizes:

  • ½” – ¾” (20 – 25mm) SDR7.4 Green with Four Gray Stripes 
  • 1″ – 12″ (32 – 315mm) SDR9 Green with Four Gray Stripes 
  • 1″ – 12″ (32 – 315mm) SDR11 Solid Green 
  • 4″ – 12″ (125 – 315mm) SDR17.6 Solid Green 

Material: PP-RCT

PESTAN MECHANICAL PIPE is designed for pressure pipe system with following fields of application: Heating and cooling systems, compressed air and vacuum, industrial, geothermal and chemical applications. PESTAN mechanical pipe is not rated for transportation of drinking water nor food grade applications. Read more …


PESTAN PURPLE PIPE (SDR 11)

PESTAN PURPLE PIPENominal ID Sizes: ½”– 12”

  • ½” – ¾” (20 – 25mm) SDR7.4 
  • 1″ – 12″ (32 – 315mm) SDR11

Identification: Purple

Material: PP-R

PESTAN PURPLE is ideal pressure pipe system for collection and transportation of recycled, reclaimed and rainwater water systems. For the non pressurized systems, PESTAN PURPLE found its ideal use as venting piping. Read more …


PESTAN DOMESTIC HOT WATER (SDR 9 with fiber)

PESTAN DOMESTIC PIPE - HOT

Nominal ID Sizes: ½” –12″ 

  • ½” – ¾” (20 – 25mm) SDR7.4 
  • 1″ – 12″ (32 – 315mm) SDR9 

Material: PP-RCT/Fiber Composite/PP-RCT

Identification: SDR7.4 and SDR9 Green with four Red Stripes

PESTAN DOMESTIC HOT WATER PIPE is engineered for the hot water applications, reinforced with the middle layer that prevents pipe from excessive expansion and contraction eliminating the need of additional expansion loops when compared to metal systems. Middle layer also makes pipe sturdy, which allows for greater hanger spacing.  Read more …


PESTAN DOMESTIC COLD WATER (SDR 11)

PESTAN DOMESTIC PIPE - COLD

Nominal ID Sizes: ½” –12″

  • ½” – ¾” (20 – 25mm) SDR7.4 
  • 1″ – 12″ (32 – 315mm) SDR11 

Material: PP-RCT

Identification: SDR7.4 and SDR9 Green with four Blue Stripes

PESTAN DOMESTIC COLD WATER PIPE is designed for Cold Potable Water and Food Processing applications. But it may also be used for other lower pressure and lower temperature applications.  Read more …


FITTINGS

FEMALE TRANSITION ELBOW

Sizes: ½” – 12″ (20mm – 315 mm)

Identification:

  • Molded – Green
  • Fabricated – Green with markers matching the pipe

Material: PP-RCT

PESTAN piping systems are compatible and easily connected to other systems and equipment. To satisfy numerous application and system needs, PESTAN offers various fittings that are grouped in 3 major collections: Injection Molded, Transition and Fabricated Fittings.

PESTAN injection molded fittings are made with greater safety factor and are compatible with all PP-R and PP-RCT piping systems. Due to the incorporation of greater safety factor, fittings are storngest part of the system and are pressure rated higher then any compatible pipe. Furthermore, heat transfer on fittings is reduced and the need for fitting insulation is eliminated in certain applications.

Because of the many fittings offered, PESTAN piping systems are compatible and easily connected to other systems and equipment. There are two main groups of fittings, one for connections with other PP-R(CT) components and the one for connection with different materials, called “transition fittings.” Transition fittings have metal inserts made of MS rods with guaranteed chemical composition to ensure tightness of joints. Read more …